SECURE WEBSITE
Distributor of Coating, Paint Mil Thickness Gages, Gauges, Meters, Testers & Non-Destructive Testing Systems
Time ultra compact TH150, TH152, TH154 portable pocket-sized metal hardness tester with Integrated D, C or DL impact devices for hardness testing of ALL metals in any direction. Integrated hardness impact probe, microprocessor and data display in a single, compact unit with memory for 256 readings and RS232 interface for connection to optional portable B/W printer for real time batch printing. The TH150 provides exceptional reliability for a wide measuring range, and is capable of automatically converting and displaying measurements into Brinell, Rockwell, Leeb and Shore hardness values.
Available in three configurations:
TH150: integrated with D impact device for normal hardness testing
TH152: integrated with C impact device for hardness testing on thin, light and face-hardened samples
TH154: integrated with DL impact device for hardness testing of deep grooves and tooth shaped surfaces
FEATURES:
Modern design and compact size with integrated impact device
Available conversion between HL, HRB, HRC, HB, HV, HS
Measuring range for most metals (see table below)
Test at any angle, even upside down
Large LCD with backlight
Memory up to 256 readings
Connection with printer by RS232 interface
Low battery indication
Test at any direction, even upside down
TECHNICAL SPECIFICATIONS:
TH150
TH152
TH154
Standard Impact Device
D integrated
C integrated
DL integrated
Hardness scales
HLD, HB, HRC, HRB, HV, HS
HLC, HB, HRC, HRB, HV, HS
HLDL, HB, HRC, HRB, HV, HS
Accuracy
±6HLD(760 ±30HLD)
±12HLC
±12HLDL
Memory
256 average readings
Output
RS 232 to printer
RS232 to printer
Min. Surface Roughness of Work piece
1.6μ ( Ra)
0.4μ ( Ra)
Max. Work piece Hardness
900HLD
960HLC
950HLDL
Min. radius of Work piece (convex/concave)
Rmin = 11mm (with support ring Rmin= 10mm)
Rmin=11mm
Rmin = 50mm (with support ring Rmin= 10mm)
Min. Work piece weight
2~5kg on stable support 0.05~2kg with compact coupling
0.5~1.5kg on stable support 0.02~0.5kg with compact coupling
Min. Work piece thickness coupled
5mm
1mm
Min. Thickness of hardened layers
0.8mm
0.2mm
Continuous working time
300 h (without backlight)
Power
Batteries 3V Lithium CR1/2 AA
Batteries 3V lithium CR1/2 AA
Batteries Lithium CR1/2 AA
Operating temperature
0 - 40°C
Overall dimensions
158×60×39 mm
149×60×39 mm
213×60×39 mm
Weight
150 g
145g
170 g
SUPPLIED WITH:
Main unit TH150 / 152 / 154
Test block with HLD value
Battery 3V
Cleaning Brush
Connection cable
TIME calibration test certificate
User manual
Warranty card
OPTIONAL ACCESSORIES:
Portable printer TA230
Additional Support rings
Printing paper
WARRANTY:
Covered by our 30 Day Exchange Policy and a 2 Year Manufacturer's warranty
DOWNLOADS:
TH150/152/154 Metal Hardness Tester Brochure
Additional Support Rings
Specifications of Impact Devices
Measurement Range and Tolerance of Time Hardness Testers
