SECURE WEBSITE
Calibrated and Shippedin 5-7 Business Days
HARTIP 3000 - State of the art, advanced, easy to use, hand-held Digital Leeb's Hardness Tester with high accuracy and wide measurement range. It is suitable for testing the hardness of ALL metals and especially used in power, petrochemical, aerospace, and automotive industries.
After obtaining data at the test site, HARTIP can be connected to a mini-printer to obtain a printout or to a computer for analyzing and printing data as desired. HARTIP hardness tester is an ideal solution for Hardness Measurements of metals with conversions to Rockwell B&C, Brinell, Vickers, Shore and HL.
High measurement accuracy
Light weight
Measures ALL common Metallic Materials
Wide measuring range: Rockwell B&C, Brinell, Vickers, Shore and HL
Automatic conversion to Brinell, Rockwell, Vickers and Shore
Automatic Mean, Min., Max., value display
Test in any directions
Impact devices: D, DC, DL, C, D+15, E, G (All impact devices interchangeable)
Menu operation
Large LCD display with backlight for low light conditions
RS 232/USB inter face to PC and micro-printer
Data management software
Complies to ASTM A956 and GB/T 17394-1998 Standards
Display: Large graphic LCD with EL backlight for low light conditions
Accuracy: +/- 0.5% (referred to L = 800; repeated accuracy = +/ - 4 L units)
Measuring range: HL 200-960 / HRC 19-70 / HRB 13-109 / HB 20-655 / HV 80-1027 / HS 31.9-102.8
Materials: 9 common metal materials; Wrought and cast steel, Alloy tool steel, Stainless steel, Gray cast iron, Nodular cast iron, Cast aluminum, Brass, Bronze, Wrought copper alloy
Batteries: 4x 1.5V. AA Alkaline or rechargeable High Capacity batteries
Operating temperature -10 to +45°C (14 to 113°F)
Dimensions: 195 x 84 x 38mm (7.7 x 3.3 x 1.5 in.)
Weight: Basic unit 550g (1.21 lbs)
SADT HARTIP 3000
Principle
Leeb Hardness Measurement
Indicator
Low battery
Accuracy
±0.5% @ HL = 800 / ± 4HL
Communication
RS 232 / USB to PC for transferring data
Display
Large graphic LCD with EL backlight
Print
RS 232 / USB to micro printer
Hardness scale
HL/HRC/HRB/HB/HV/HS
Power supply
1.5V AA battery x 4
Measuring range
HL200-960/HRC19-70/ HRB13-109/ HB20-655/ HV80-1027/ HS31.9-102.8
Working environment
-10~+45ºC
Impact device
D (Standard) DC/D+15/C/G/E/DL (Optional)
Dimension (mm)
195x84x38
Materials
9 common metal materials
Net weight (g)
550
Memory
960 data in 8 blocks, can be saved and recalled
Standards
Conforms to:
ASTM A956,
GB/T 17394-1998
Statistics function
Average / Max. / Min. / value
Material
HL
HRC
HRB
HB
HV
HS
Steel & cast steel
19 - 68
38 - 100
80 - 683
80 - 1027
32 - 102
Cold work tool steel
20 - 67
-
80 - 900
Stainless steel
20 - 62
46 - 102
85 - 655
85 - 800
Grey cast iron
93 - 334
Nodular cast iron
174 - 960
130 - 390
Cast aluminum alloys
20 - 160
Copper / Zinc alloys (Brass)
13 – 95
40 - 173
Cu Al / Cu Sn alloys (Bronze)
60 - 290
Wrought copper alloys
45 - 315
Hardness Tester 3000
Impact Device type D
Small support ring
Test block D
4 AA Batteries
Carrying case
Cleaning brush
User Manual
Micro-printer
Impact Device: DC, D+15, G, C, E, DL
Test block G
Special support rings
Leather case
Interface cable (to PC or printer)
HARTIP 3000 Brochure
Specifications Of Impact Devices
Specifications Of Support Rings
Probe Model
Application Description
Impact Device Type D
Universal standard impact device.
Used for the majority of hardness testing assignments.
Impact Device Type DC
Extremely short impact device. Used in very confined spaces.
Impact Device Type DL
Needle type impact device with front secton diameter 2.78mm and a length of only 50mm. Used for measurements in extremelyy confined spaces.
Impact Device Type C
Impact device with reduced impact energy.
Used for testing of surface hardened or impact sensitive components.
Impact Device Type D+15
Impact device with slim front section and measuring coil moved back .
Used for hardness measurements in grooves and on recessed surfaces.
Impact Device Type E
Impact device with synthetic diamond tip. For measurements in the extremely high hardness range.
Impact Device Type G
Impact device with enlarged testing tip and increased impact energy.
Used for measurements in the Brinell measurement range only in solid components.
For D, DL, DC, D+15, and E Impact Devices: a Minimum thickness of 10mm (3/8 inch) is required. The sample weight is required to be over 5kg (11 lbs), however for samples weighing less than (5 kg) 11lbs, you can couple the sample to a solid support weighing over 5kg (11lbs) to achieve accuracy. The maximum roughness of surface finish is 2µ Ra.
For G Impact Device: a Minimum thickness of 10mm is required. The sample weight should be over 15 kg, however for weights less than 15kg, you can use the sample coupling method. The Maximum Roughness should be 7µ Ra.
For C Impact Device: a Minimum thickness of 1mm is required. The sample weight should be over 1.5 kg, however for weights less than 1.5 kg you can couple the sample to a solid support. The Maximum Roughness requirement is 0.5 µ Ra.
Metal Hardness Tester | Leeb Hardness Tester | Metal Hardness Measurement | Portable Hardness Tester | Rockwell, Leeb, Brinell, Vickers, Shore Hardness Test | Measurement of Hardness of Metals | SADT HARTIP | SADT Hardness Tester
