SECURE WEBSITE
Coating Thickness Gauges, Paint Meters, Paint Gauges, Wet & Dry Film Thickness Gages & Testers
A set of four plastic test shims for for checking calibration and operation accuracy of coating thickness gages and ultrasonic thickness measurement equipment.
For use with magnetic, eddy-current and ultrasonic coating thickness gauges.
(Not intended for use with magnetic pull-off type gages).
Approximate thickness of shims:
~ 2.0 mil (50 µm), ~ 4.0 mil (100 µm), ~ 10 mil (500 µm), ~ 20 mil (500 µm).
A complete set of ten (10) NIST Traceable OICM Certified plastic reference test shims for for checking calibration and operation accuracy of all magnetic and electronic coating thickness gauges, paint gauges, mil thickness gauges and all ultrasonic thickness measurement equipment. For use with magnetic, eddy-current and ultrasonic coating thickness gauges.
Calibration certificate is traceable to National Institute of Standards and Technology (NIST).
Manufactured and certified by Oxford Instruments. Approved for military or industrial companies.
~ 1.0 mil (25.4 µm), ~ 2.0 mil (50.8 µm), ~ 3.0 mil (76.2 µm), 4.0 mil (101.6 µm), 5.0 mil (127 µm), 7.5 mil (190.5 µm), 10.0 mil (254 µm), ~ 20.0 mil (508 µm), ~ 40 mil (1016 µm), ~ 60 mil (1524 µm).
A set of five QNix Certified plastic test shims for for checking calibration and operation accuracy of coating thickness gauges, paint gauges, mil thickness gauges and ultrasonic thickness measurement equipment. For use with magnetic, eddy-current and ultrasonic coating thickness gauges.
~ 0.5 mil (12.5 µm), ~ 2.0 mil (50 µm), ~ 4.0 mil (100 µm), ~ 13.5 mil (343 µm), ~ 40 mil (1000 µm).
Oxford Instruments set of 3 Cu Reference Standards.
50, 100 & 150 µinch 3"x3" Surface Ecu Standards (Set of 3). Supplied with a protective carrying case.
The Oxford Instruments CMI153 Coating Thickness Gauge features dual Fe/ NFe measurement technology that automatically detects either ferrous or non-ferrous metal substrates and then employs either magnetic induction or eddy-current technology. Works on ALL metals, including Steel, Aluminum, Copper, Zinc, Brass, etc.. Built upon Oxford Instrument's highly successful CMI150 architecture the CMI153 delivers an improved measurement probe with enhanced performance, superior substrate sensitivity and ultra compact design.
Measurement Range: Fe 0-80 mil (0-2000 μm) | NFe 0-60 mil (0-1500 μm)
The CMI165 provides unique temperature compensated Copper Thickness Measurements in an ergonomic compact hand-held device. Measurements on Copper are affected by the temperature of the measured sample.
The CMI 165 accounts for temperature in the measurement of thickness ensuring accurate in-process inspection results regardless of Copper temperature. This versatile, portable gauge equipped with protective case, has a rugged and durable design that allows it to be taken into the harshest environments.
Measurement Range: Cu Electroless: (0.25-12.7) μm, (0.01-0.5) mil | Electrodeposited: (2.0-254) μm, (0.1-10) mil
OICM CMI233 package enables control of Plating and Paint & Powder Coating processes using advanced magnetic induction and eddy-current technology. It provides Non-Destructive Coating Thickness Measurement for non-magnetic coatings over magnetic (ferrous) substrates and non-conductive coatings over conductive substrates (primarily Al, Cu as close to 100% IACS conductivity is required). The system was specially designed to handle the needs of platters, coaters, and quality professionals. Oxford Instruments CMI233 gauge is available in 3 different configurations: CMI233E, CMI233M and CMI233Dual.
Measurement Range: Fe 0-120 mil (0-3000 μm) | NFe 0-60 mil (0-1500 μm)
Oxford Instruments SRP-T1, set of 3 Replacement Probe Tips for CMI165 Copper Thickness Gauge.
Supplied with a protective carrying case.
Oxford Instruments SRP-T1, single Replacement Probe Tip for CMI165 Copper Thickness Gauge.
The PaintGage EZ Car Paint Gauge was designed for non-destructive thickness measurement of Paint and Laquier coatings on new and preowned automobiles. PaintGage EZ Automotive Paint Meter measures coating thickness on Steel and Aluminum panels. Compact size, cosistency in measurements and real size measuring scales on the front of the gauge makes it an ideal toool for Automobile Dealers, Auto Auctions, Body Shops, Auto Detailers or any company requiring a stable and accurate measurement of the automotive dry film coating thickness. PaintGage EZ Paint Gage is an ideal tool for verifying the Coating Thickness on new and pre-owned automobiles, making it easy to identify collision damage and previous refinish work in all types of weather conditions. PaintGage EZ outperforms many other Paint Meters and Coating Thickness Gauges in it's class.
Measurement Range: Fe 0-40 mil (0-1000 μm) | NFe 0-40 mil (0-1000 μm)
The PaintGage FNF Coating Thickness Gauge measures thickness of coatings on ALL metals, including Steel, Aluminum, Copper, Brass, Zinc, etc.. Device measures non-magnetic coatings on Steel and Iron and non-conductive coatings on Aluminum and other metals, automatically recognizes the substrate and takes an accurate measurement. PaintGage FNF Paint Gauge is an ideal tool for non-destructive dry film Coating Thickness Measurement on Ferrous and Non-Ferrous substrates and structures. PaintGage FNF Paint Meter widely used by industrial and manufacturing companies that require a highly accurate measurement of the dry coating thickness. PaintGage FNF outperforms many other Paint Meters and Coating Thickness Gauges in it's class. Measurement Range: Fe 0-80 mil (0-2000 μm) | NFe 0-80 mil (0-2000 μm)
The PaintGage FNF-A (Type A) Paint Thickness Gauge (PTG) & Coating Thickness Meter measures thickness of coatings on both Steel and Aluminum. It measures non-magnetic coatings on Steel and non-conductive coatings on Aluminum, automatically recognizes the substrate and takes an accurate measurement. PaintGage FNF-A Paint Gauge is an Ideal tool for verifying the thickness of paint on new and pre-owned automobiles, making it easy to identify collision damage and all previous refinish work in all types of weather conditions. PaintGage FNF-A is a light weight, pocket sized, high resolution Paint Meter widely used by automotive industry professionals. It outperforms many other Paint Meters and Coating Thickness Gauges in it's class.
Set of Instruments provided for corrosion inspection, dry film coating thickness measurement of protective coatings over ferrous substrates, surface profile measurement and determining the environmental conditions.
Set of Instruments provided for corrosion control, dry film and wet film thickness measurement of protective coatings over ferrous substrates, surface profile measurement and determining the environmental conditions. Ideal for climbers (Pipeline coating measurement) as the supplied dry film thickness gauge allows for a safe one-hand operation and a fast measurement.
Set of Instruments provided for corrosion control and inspection, wet and dry film thickness measurement of protective coatings over ferrous substrates, surface profile measurement and determining the environmental conditions. Ideal set of necessary tools for evaluation and management of collected paint and coating thickness data on PC.
PTG 900FN Mil Thickness Gauge is an affordable solution for all Paint and Coating Thickness Measurement needs. With 5% accuracy and a 0.1 mil resolution, PTG 900FN Coating Thickness Gauge is capable of meeting the requirements of most commercial lacquer, paint and coating thickness measurement applications on ferrous and non-ferrous substrates and structures. Instrument's testing performance is both non-destructive and accurate. All measurements are displayed up to 2 decimal points with a resolution of 0.1 Mil.
Measurement Range: Fe 0-50 mil (0-1250 μm) | NFe 0-50 mil (0-1250 μm)
Affordable solution for all Coating Thickness Measurement applications on Ferrous Metals (Steel and Iron). External probe allows measurement of coatings in a difficult to access inspection points, where standard Paint Gauges cannot be used. With 5% accuracy and a 0.1 mil resolution, PTG 929F Coating Thickness Gauge is capable of meeting the requirements of most commercial lacquer, paint and coating measurement applications on ferrous substrates and structures. Testing performance is both non-destructive and accurate. All measurements displayed up to 2 decimal points with a resolution of 0.1 Mil.
Measurement Range: Fe 0-50 mil (0-1250 μm)
Affordable solution for all Coating Thickness Measurement needs. External cable probe allows measurement of coatings in a difficult to access inspection points, where standard Paint Gauges cannot be used. With 5% accuracy and a 0.1 mil resolution, PTG 929FN Coating Thickness Gauge is capable of meeting the requirements of most commercial lacquer, paint and coating measurement applications on non-magnetic coatings ferrous and non-conductive coatings on non-ferrous substrates and structures. Testing performance is both non-destructive and accurate. All measurements displayed up to 2 decimal points with a resolution of 0.1 Mil and measurement accuracy of 5%.
QNix 1200 (QuaNix) Mil Coating Thickness Gauge. As a classical among the Paint Thickness Gages, its absence can not be imagined in the automotive sector. Patented Electronic Coating Thickness Meter - measuring instrument with a single probe for steel and iron, the QuaNix 1200 Paint Gauge with a clear readable duplex LCD offers an unusually extensive spectrum of use and a large measuring range. The flat design of the gauge permits also safe measurements at difficult to access inspection points.
Measurement Range: Fe 0-80 mil (0-2000 μm)
QNix 1500 (QuaNix) Mil Coating Thickness Gauge. As a classical among the Paint Thickness Gages, its absence can not be imagined in the automotive sector. Patented Electronic Coating Thickness Meter - measuring instrument with a dual probe for Ferrous metals (Steel and Iron) and Non-Ferrous Metals (Aluminum, Zinc, Copper, Brass, etc.). QuaNix 1200 Paint Gauge with a clear readable duplex LCD offers an unusually extensive spectrum of use and a large measuring range. The flat design of the gauge permits also safe measurements at difficult to access inspection points.
Measurement Range: Fe 0-200 mil (0-5000 μm) | NFe 0-200 mil (0-5000 μm)
QNix 4200 (QuaNix) Dry Film Coating Thickness Gauge was developed particularly for measuring tasks in the automobile industries. This compact Paint Gauge permits extremely precise measurements of lacquer and corrosion protection thicknesses, on Ferrous metals - Steel and Iron as well as Non-Ferrous metals - Aluminum, Zinc, Copper, Brass, etc.
Measurement Range: Fe 0-120 mil (0-3000 μm)
QNix 4500 (QuaNix) Dry Film Coating Thickness Gauge was developed particularly for measuring tasks in the automobile industries. This compact Paint Gauge permits extremely precise measurements of lacquer and corrosion protection thicknesses, on Ferrous metals - Steel and Iron as well as Non-Ferrous metals - Aluminum, Zinc, Copper, Brass, etc.
Measurement Range: Fe 0-120 mil (0-3000 μm) | NFe 0-120 mil (0-3000 μm)
QNix Crash Check (QuaNix) Paint Thickness Tester was developed particularly for used car trading. Simply place the tester on the car body and press the red button. The tester immediately indicates what one can not see with the naked eyes.
The electronic-magnetic sensor in Crash Check quickly detects whether the coating on the sheet-steel body is thicker than it was in the original state. This way you can detect efforts to cover suspicious and repaired sections. With its ingeniously simple technology for fast and simple measurements, the CrashCheck became the ideal car body and accident tester.
QNix Handy, an Automotive Paint Meter and powerful, pocket-sized Paint Thickness Gauge that measures Coating Thickness on Steel and Aluminum car body panels. QNix Handy Paint Gauge features a dual sensor (Steel & Aluminum ) probe and quick readings on a digital LCD display. No user calibration is required with quick, automatic no button recognition and switch to Non Ferrous metals. Whether you work in auto-remarketing, in collision repair, or as a used car buyer, this cost-effective thickness gage will meet your needs in determining the true value and a condition of a vehicle. Available in 2 diffrent versions: Imperial (mil) and Metric (μm).
Measurement Range: Fe 0-20 mil (0-500 μm) | NFe 0-20 mil (0-500 μm)
Smart Sensor AR930 Dry Film Coating Thickness Gauge was developed particularly for measuring tasks in the manufacturing industries. This compact gauge permits extremely precise and non-destructive measurements of lacquer and anti - corrosion protection coating thicknesses on steel and iron. Extended measuring range, memory and Min/ Max data recording functions make this device very useful for quality control of paint or coating thickness on ferrous metals.
TT210 Coating Thickness Gauge is designed for precise measurements of coatings on all Ferrous and Non-Ferrous metals. With built in dual mode probe, Professional fully automatic Paint Thickness Gauge with memory for 500 measurements and Min/Max/Dev statistical data features. Data can be transferred to a PC by using optional RS232 cable or printed directly with optional portable B/W printer.
Supplied with Test certificate.
The TQC LD5820 Powder Coating Meter optimizes the powder application by measuring the output of the cabin. This is a Non-Contact Gage and does not require a physical contact between measuring wireless probe and an uncured powder (paint) coating. The TQC Powder Coating Meter measures uncured powder coatings using Ultrasonic Technology to automatically calculate a predicted cured thickness. Collected information is sent via Bluetooth® to the recorder, where the value is shown in the large display. Taking a measurement is fast and accurate (3%) in the range of 30 to 110 microns.Using the TQC Powder Coating meter saves on powder and reduces loss of products. For most powder coating applications no calibration or adjustment is required. The TQC Powder Coating Thickness Meter complies with ASTM D7378, “Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness”.
